Furman Elite-20 PF i 13-Outlet Ultra Linear AC Power Source

Input – 20 Amp capacity required Output – 16-20 Amps RMS (maximum, all outlets combined – continuous)
Transverse (Differential) Mode:> 40 dB from 5Khz. – 100 kHz.>80 dB from – 100 kHz. – 1GHz.
Common Mode:>40dB from 10Hz. – 30 kHz.>20 from 40 kHz. – 1MHz.

Amazon.com Price: $749.00 (as of 07/02/2023 23:54 PST- Details)

Added to wishlistRemoved from wishlist 0
Category:

Product Description

SMP provides the highest level of protection available Lift significantly reduces AC line noise E.V.S. protects equipment from dangerous overvoltage conditions Zero ground contamination circuitry protects critical digital components Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers Ultrasonic bi-filtering isolates digital and video circuits from analog components Retractable LED lamps illuminate a cabinet or rack full of equipment Detachable module for telco surge suppression and 3 pairs of cable / satellite TVSS isolated F-connectors12 Volt triggering for remote control

From the Manufacturer

From the Manufacturer

Furman Elite-20 PF i Ultra Linear AC Power Source – Ultra-line Profile with Superior Technology

The extreme AC demands encountered in the professional audio / video arena have required technological developments far in excess of typical home theater/audiophile power products. In studios, live sound, and broadcast facilities, breakdown is unacceptable. Equipment failure or poor performance is costly. The same is true of today’s home theater. Furman’s solution based technology, extensive engineering expertise, and robust build quality have answered the challenge of today’s corrupted power lines, and led to the creation of the Elite-20 PF i.
EMI/RFI noise filtration built into outlet receptacle

Use Your Entertainment Equipment Up to Its Full Potential

With today’s chaotic demands on many municipal power facilities, AC voltage is often reduced so that it can be stretched to fulfill excess demand. This creates a substantial negative impact on your system’s performance. Power amplifiers and powered sub-woofers cannot perform to their full potential. Even a relatively modest reduction in AC voltage can obliterate the sonic impact of an otherwise superior system. Just as problematic are excessively high line voltages. Excess voltage can overheat sensitive circuits; lower the life and reliability of projector lamps, and cause many circuits to shut down. With the SPR-20i’s exclusive Stable Power AC Voltage Regulation Technology, voltage-starved power amplifiers and powered sub-woofers perform at their full potential. With the SPR-20i, home theaters are supplied with constant, virtually unwavering AC voltage. This assures trouble-free service for any environment suffering from unstable power.

Delete the Line Noise and Get Pure Quality Sound

Today’s power lines are plagued with RF and EMI noise. When connecting sensitive equipment to your home’s power outlet, AC noise couples into your system’s critical components, masking low level signals and crippling performance. This low level content is critical because it relays the crucial harmonics and ambience in audio, as well as the depth and clarity in video. The Elite-20 PF i is so substantial in its ability to unmask critical signal content, its performance is surpassed only by the Furman Reference Series. With Furman’s Ultra-Linear Filtering, televisions, projectors, DVD players, amplifiers, and processors are fed pristine AC power. For the first time, you will see and hear your theater or audio system as it should be — uncompromised.

Uncompromising Surge Protection

Another critical feature is our exclusive Series Multi-Stage Protection featuring Extreme Voltage Shutdown (EVS). This virtually maintenance-free surge suppression assures the highest level of AC protection possible, without sacrificing itself when the offending surge is severe — no damaged equipment, no service calls, no down time. Further, our famous retractable front panel LED lamps allow easy viewing of either a rack or cabinet full of equipment, even when your theater lights are off.

The Elite-20 PF i also features remote control capability via 12V triggering, compatible with the 12V triggering devices commonly found in power receivers and pre-amp processors. Additional products (such as a remote subwoofer) can be daisy-chained from the 12V output jack for an additional triggered unit. The 12V triggering feature may be bypassed if desired.

Unique Technology for Clean, Clear Sound and Video

The essence of the Elite-20 PF i is Furman’s unique Power Factor Technology. For the first time, low-level analog, digital, and video components are not modulated or distorted by the power amplifier’s extreme AC current demands. Further, the power amplifier is fed a highly filtered, extremely low-impedance supply of AC power. The Elite-20 PF i, in fact, has in excess of 4 Amps of continuous current reserve (over 55 amps peak charge) for the most extreme peak power demands. This technology enables power amplifiers and powered subwoofers to operate at maximum efficiency, reaching levels of performance previously unattainable.

No longer will your amplifier’s performance be at the mercy of your home’s incoming AC power or inferior AC protection/filtering devices. The net effect is as if your power amplifier virtually doubled in power and improved immeasurably in quality.

When employing the Elite-20 PF i, you will immediately notice far clearer, stunningly focused sound and visual images from your system. Video presentation will be crisp and colors true with greater gray and black scale definition, as well as noticeably improved depth and clarity. Sonic transients will be startlingly fast with bass fundamentals that shake foundations with their weight and visceral impact. Mid and high frequencies will bloom with sweet, non-glaring ease as imaging improves dramatically, all the while remaining true to your system’s inherent virtues.

Detachable module for telco surge suppression and 3 pairs of cable / satellite TVSS isolated F-connectors

Technical Specifications

  • AC Current Capacity: Input – 20 Amp capacity required, Output – 16-20 Amps RMS (maximum, all outlets combined – continuous)
  • Linear Noise Attenuation: Transverse (Differential) Mode: > 40 dB from 5Khz. – 100 kHz. >80 dB from – 100 kHz. – 1GHz. Common Mode: >40dB from 10Hz. – 30 kHz. >20 from 40 kHz. – 1MHz. (Linear attenuation curve from 0.05 – 100 ohms line impedance)
  • Outlets: 1 (ultra-linear filtered outlet – front panel), 8 (ultra-linear filtered outlets with additional bi-directional ultrasonic filtering for each analog or video components bank), 4 (power factor corrected amplifier outlets – 4 amps RMS reserve – resistive load – over 55 amps peak charge)
  • Transient Voltage Surge Suppression: 120 VAC – Series Multi-Stage Protection – Non-Sacrificial with Zero Ground Contamination
  • Dimensions: 4H x 17W x 14.75D inches (Standard 2 rack unit height without feet)
  • Weight: 18 lbs
  • Power Consumption: 12 Watts for display and control circuits independant of actual load
  • Safety Agency Listing: NRTL-C

Choose a Furman Power Source That is Right for Your Entertainment System – You Can Never Have Too Much Power

For over 33 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Though the need for pristine AC power is nothing new, Furman’s technology and its unique implementation are revolutionary and without peer. Today’s power lines are plagued with RF and EMI noise. Furman has the power supply that is perfect for your entertainment system. See and hear your theater or audio system as it should be — uncompromised.

  • IT-Reference 20i Discrete Symmetrical AC Power Source – 20 amp capacity. Five discrete power banks eliminate inter-component noise and interference. Power Factor Technology provides over 80 Amps peak charge surplus current for power-starved amplifiers. Linear Filtering Technology dramatically reduces differential AC line noise. Comprehensive, non-sacrificial AC surge protection. 20A capacity, 12 outlets (8 Balanced Power, 4 Power Factor Technology), Telco In/Out, 3 pairs coaxial connectors (Universal Coax). Rack ears included.
  • IT-Reference 15i Discrete Symmetrical AC Power Source – 15 amp capacity. Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifier. Linear Filtering Technology dramatically reduces differential AC line noise. SMP non-sacrificial surge suppression with Extreme Voltage Shutdown. 15A capacity, 11 outlets (2 Balanced Power, 4 Power Factor Technology, 4 Linear Filtered, 1 Front. Panel Linear Filtered for convenience), Telco In/Out, 3 pairs coaxial connectors (Universal Coax). Rack ears included.
  • IT-Reference 7i Supplemental Discrete Symmetrical AC Power Isolation – 7 amp capacity is ideal for upgrading an existing power conditioner or isolating remotely located video components. Symmetrically Balanced Power cancels the audio hum and video distortion caused by ground loops. Linear Filtering Technology dramatically reduces differential AC line noise. SMP non-sacrificial surge suppression with Extreme Voltage Shutdown. 7A capacity, 4 Balanced Power outlets, 3 pairs coaxial connectors (Universal Coax). Rack ears included.
  • SPR-20 i Stable Power AC Voltage Regulator – 20 amp capacity. Stable Power Regulator. Provides an ultra-stable 120 VAC supply from low or high voltage sources. Cool running, noise free technology allows placement in critical listening environments. Linear Filtering Technology dramatically reduces differential AC line noise. SMP non-sacrificial surge suppression with Extreme Voltage Shutdown. Front panel digital LED meter displays input voltage or output current with toggle button. 20A capacity, 12 Regulated and Linear Filtered outlets, Telco In/Out, 3 pairs coaxial connectors (Universal Coax). Rack ears included.
  • Elite-20 PF i Ultra Linear AC Power Source – 20 amp capacity. Ultra-Linear AC Power Conditioner with Power Factor Technology. Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers. Ultra-Linear Filtering Technology for stunning audio and video clarity. SMP non-sacrificial surge suppression with Extreme Voltage Shutdown. Ultrasonic bi-filtering isolates digital and video circuits from analog components Retractable LED lamps illuminate a cabinet or rack full of equipment. 12 Volt triggering for remote control with Bypass option. 20A capacity, 13 outlets (4 Power Factor Technology, 9 Linear Filtered), Telco In/Out, 3 pairs coaxial connectors (Universal Coax). Rack ears included.
  • Elite-15 PF i Linear Filtering AC Power Source – 15 amp capacity. Ultrasonic bi-filtering isolates digital and video circuits from analog components. Linear AC Power Conditioner with Power Factor Technology. Power Factor Technology provides over 45 Amps peak charge surplus current for power-starved amplifiers. Wide-bandwidth Linear Filtering Technology for stunning audio and video clarity. SMP non-sacrificial surge suppression with Extreme Voltage Shutdown. Retractable LED lamps illuminate a cabinet or rack full of equipment. 12 Volt triggering for remote control with Bypass option. 15A capacity, 13 outlets (4 Power Factor Technology, 9 Linear Filtered), Telco In/Out, 3 pairs coaxial connectors (Universal Coax). Rack ears included.
  • Elite-15 DM i Linear Filtering AC Power Source – 15 amp capacity. Digital volt and current meters. Linear AC Power Conditioner. Linear Filtering Technology for remarkable audio and video clarity. SMP non-sacrificial surge suppression with Extreme Voltage Shutdown. Ultrasonic bi-filtering isolates digital and video circuits from analog components. 12 Volt triggering for remote control with Bypass option. 15A capacity, 13 Linear Filtered outlets, Telco In/Out, 3 pairs coaxial connectors (Universal Coax). Rack ears included.
  • Elite-15 i Linear Filtering AC Power Source – 15 amp capacity. Ultrasonic bi-filtering isolates digital and video circuits from analog components. Linear AC Power Conditioner. Linear Filtering Technology for remarkable audio and video clarity. SMP non-sacrificial surge suppression with Extreme Voltage Shutdown. Retractable LED lamps illuminate a cabinet or rack full of equipment. Digital voltmeter. 12 Volt triggering for remote control with Bypass option. 15A capacity, 7 Linear Filtered outlets, Telco In/Out, 3 pairs coaxial connectors (Universal Coax). Rack ears included.

Input – 20 Amp capacity required Output – 16-20 Amps RMS (maximum, all outlets combined – continuous)
Transverse (Differential) Mode:> 40 dB from 5Khz. – 100 kHz.>80 dB from – 100 kHz. – 1GHz.
Common Mode:>40dB from 10Hz. – 30 kHz.>20 from 40 kHz. – 1MHz.
Ultra-Linear AC power conditioner with Power Factor Technology
Power Factor Technology provides over 55 Amps of peak charge surplus current for power-starved amplifiers
Ultrasonic bi-filtering isolates digital and video circuits from analog components
E.V.S. protects equipment from dangerous overvoltage conditions
Retractable LED lamps illuminate a cabinet or rack full of equipment

Specification: Furman Elite-20 PF i 13-Outlet Ultra Linear AC Power Source

Product Dimensions

Item Weight

Manufacturer

Item model number

Is Discontinued By Manufacturer

Date First Available

Brand

Furman Elite-20 PF i 13-Outlet Ultra Linear AC Power Source
Furman Elite-20 PF i 13-Outlet Ultra Linear AC Power Source

Amazon.com Price: $749.00 (as of 07/02/2023 23:54 PST- Details)

Homes-shop.com
Logo
Shopping cart